10 results have been found.
The Smooth Idler Pulley is an Idler Free Wheel that can be used with Timing Belt up to 9mm wide!This idler pulley can be mounted in a variety of fashions to your design. It can be plate mounted as well as direct V-Slot mounted using a tee nut and a Slot Washer.
The Solid V Wheel is a strong wheel that resists deflection due to its solid nature. Solid V Wheel is suitable for builds where heavier loads are required and less compression in the delrin is desired. Many of these wheels could be added to a gantry to allow an even distribution of the load across them.
M4 Threaded T-Slot Nut also known as T-Nuts, Sliding Type. This T-Nut Sliding very helpful in pre assembly of 20mm T-slot Aluminium Extrusion Profiles. This T-Slot nut slides into the side-slot of the 20mm T-Slot extrusion from either on one ends
This is a spacer that has an off center (Eccentric) 5mm hole drilled through it. It is used to tension V wheels and the V-slot. With this design, eccentric adjustments are done using the spacer which provides superior performance over eccentric nuts. When you rotate it, it will move a V wheel mounted to it, allowing you to adjust the tension against the...