PLA Filament 1.75mm

New product

PLA is a biodegradable material for 3D Printing.

Select Colour Below

More details

₹ 1,450.00

  • Black
  • White
Sold Out

Tags: filament

Product info

Polylactic acid or polylactide (PLA, Poly) is a biodegradable thermoplastic aliphatic polyester derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane.

Unlike PLA extrusion-temperature is much lower than ABS, and most often doesn’t require a heated bed.

Print stick well directly on Kapton Tape [or] Blue Painters Tape [or] Plain Glass with Glue Stick

MaterialPLA (Polylactic acid)
Diameter1.75 mm
Weight1 KG
Hotend Temperature180-195 °C
Heatbed Temperature0-55 °C
Product Features
  • Flows rapidly, don't block the nozzle
  • No smell or smoke while printing (Compared to ABS)
  • PLA Filament has small shrinkage even when printing big size model
  • Can be printed without heat bed
  • Recyclable - PLA is biodegradable plastic made from starch of plants
  • Sealed in air tight packaging

Frequently Asked Questions

Why Does the Curling Occurs?

Curling during extrusion happens when temperature is too low/high. It can be avoided by keeping the outer surface of nozzle clean, if there is previous molten plastic on top of the nozzle this happens.

What is the best extrusion temperature?

PLA best extrusion temperature is between 180-195, The extrusion temperature also depends on the hotend and extruder you use, play around with the temperature and find the best temperature that works for you.

What is the printing speed?

For Good quality print use : 45 mm/s, medium quality print at 60 mm/s, for fasting low quality printing run at 120 mm/s. It depends on the many factor software, hardware, and build, etc.,