Full Graphic Smart LCD Controller

0063

New product

This full graphic Smart Controller contains a SD-Card reader, buzzer, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the smart adapter included.

More details

₹ 908.00

In Stock

20 Items

- +

 
Product info

LCD12864 based Full Graphic Smart LCD Controller for RepRap, 3D Printer and Prusa i3

This full graphic Smart Controller contains a SD-Card reader, buzzer, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the smart adapter included.

After connecting this panel to your RAMPS you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.

Package Contents
  1. Full Graphic Smart LCD Controller x 1 Qty
  2. Smart Adapter for RAMPS/RUMBA x 1 Qty
  3. 150 mm cable x 1 Qty
Specification
Pixel Dimension128x64
User Input/OutputRotary encoder, SC-Card reader, Buzzer
Instructions

Step 1: Download and install U8glib to your ARDUINO IDE's library folder

U8glib Website

U8glib Download URL

Step 2: Edit Configuration.h in Marlin firmware, Search and Uncomment (just remove the // at the beginning)

#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER

Step 3:Then Compile and Upload the firmware

Step 4:Power off the Arduino, connect the panel, reapply power, and everything should work.