Full Graphic Smart LCD Controller

SKU ID: ASE-LCD-FG
  • ₹ 1,004.00

Only 9 left!

This full graphic Smart Controller contains a SD-Card reader, buzzer, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the smart adapter included.

After connecting this panel to your RAMPS you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.

Package Contents

Full Graphic Smart LCD Controller x 1 No

Smart Adapter for RAMPS/RUMBA x 1 No

cable 150 mm x 1 No

Specification

Pixel Dimension : 128x64

User Input/Output : Rotary encoder, SC-Card reader, Buzzer

Instructions

Step 1: Download and install U8glib to your ARDUINO IDE's library folder

U8glib Website

U8glib Download URL

Step 2: Edit Configuration.h in Marlin firmware, Search and Uncomment (just remove the // at the beginning)

#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER

Step 3:Then Compile and Upload the firmware

Step 4:Power off the Arduino, connect the panel, reapply power, and everything should work.

Image Disclaimer: All images used are for illustrative purposes only. Individual features such as textures and colours may vary.

Specification Disclaimer: Product specification and description may change with every new stock, If you need current specification please write to us before purchase.


We Also Recommend