Arduino Mega 2560 (Arduino Compatible)

SKU ID: ASE-AM-2560
  • ₹ 899.00


Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).

The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.

The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.

Mega 2560 is a compatible clone of Arduino Mega 2560.

Important Note: This Mega 2560 is using CH340G usb controller, so you need install the driver for CH340G. Follow below link on how to install the driver.

https://www.asensar.com/article/electronics/arduino-not-detected.html

Specification

Microcontroller : ATmega2560

Operating Voltage : 5V

Input Voltage (recommended) : 7-12V

Input Voltage (limits) : 6-20V

Digital I/O Pins : 54 (of which 15 provide PWM output)

Analog Input Pins : 16

DC Current per I/O Pin : 40 mA

DC Current for 3.3V Pin : 50 mA

Flash Memory 256 KB of which 8 KB used by bootloader

SRAM : 8 KB

EEPROM : 4 KB

Clock Speed : 16 MHz

Image Disclaimer: All images used are for illustrative purposes only. Individual features such as textures and colours may vary.

Specification Disclaimer: Product specification and description may change with every new stock, If you need current specification please write to us before purchase.


We Also Recommend