To make it easier we have created a base Slic3r bundle configuration file, which you can download and import it into your Slic3r.

For this follow these steps

Step 1: Download the zip file and extract the file. It will contain Slic3r configuration bundle file under Slicer directory

Step 2: Start Repetier Host Software

Step 3: As shown in below image, Select the Slicer Tab (1) and select Slic3r as slicer (2) and then click Configuration button (3)

How To Configure Slic3r for RepRap Prusai3

Step 4: Wait for Slic3r configuration windows to be opened (you should see a window similar to below).

How To Configure Slic3r for RepRap Prusai3

Step 5: In Slic3r configuration window select from File > Load Config Bundle, then navigate to the extracted zip file location open the bundle configuration (.ini) file under Slicer directory

Step 6: Once the configuration is loaded, you should see new configuration. Use these setting as base reference and tune further to get better prints.

How To Configure Slic3r for RepRap Prusai3

This configuration bundle file will create below profiles under different tabs

  • In Print Setting Tab -> [email protected]
  • In Filament Setting Tab -> PLA @ 190C
  • In Printer Setting Tab -> Prusai3

Hope this guide has made configuring an easy job, Slic3r has excellent documentation. Play with the setting to get best quality prints.